CNC Nema 34 Gesloten Lus Servo Stappenmotor, Encoder Driver, MACH3 Interface Board
-
Ontvang tussen Oct 06 - Oct 10
-
90 dagen gratis retourneren
-
24-uurs responstijd
CNC Nema 34 Gesloten Lus Servo Stappenmotor, Encoder Driver, MACH3 Interface Board
Aanvullende informatie
Productbeschrijving
Wat maakt dit zo bijzonder?
- Nema 34 Gesloten Lus Servo Stepper Motor:5Nm,5Nm en 12Nm houdkoppel,8° stap hoek, 1435mm motor lengte, 50mm as diameter, 300mm tot 4000mm as lengte,34A tot72A stroom/fase,2Ω tot4Ω weerstand/fase, en 13g-45g motor gewicht.
- Driver: HBS860H driver met 5V-24V pulsspanning, 20V-80V AC/24V-100V DC spanning, 8A/fase fase stroom, enkel pulsmethode, 2-256 onderverdeling, maximum 51200 stappen/omwenteling, 151x5x52mm behuizing formaat, en 16mA logische ingangsstroom.
- Voeding: 400W 60V voeding.
- Interface Board: 4-Assige USB-poort Mach3 breakout board.
- Mach3 Bestanden: Downloadbare Mach3 bestanden en plug-in.
- Encoder Kabel: Wordt geleverd met een 3 meter verlengde encoder kabel, met 5 meter en 8 meter verlengde encoder kabel beschikbaar op aanvraag.
- Aanpasbaar: Het kit kan worden aangepast aan de eisen van de gebruiker.
Specificaties:
Dit product heeft meerdere varianten, deze variant is: 4.5Nm1 Set Motor Kit.
- Motortype: Nema 34 Gesloten Lus Servo Stappenmotor
- Moterlengte: 1435 mm
- Asdiameter: 50 mm
- Aslengte: 42,8 mm
- Stroom per fase: 0,320,54 A
- Weerstand per fase: 3,25,4Ω
- Inductie per fase: 1327 mH
- Houdkoppel: 4,5 N.m, 8,5 N.m, 12 N.m
- Stap hoek: 1,88°, 1,81°, 1,85°
- Rotor inertie: 1440 kg.cm2
- Leidingsdraad: 4draads
- Motorgewicht: 2,94,5 kg
- Bestuurder: HBS860H
- Afmetingen bestuurder: 151x97,5x52 mm
- Puls spanning: 5V24V
- Spanning: VAC20V80V/VDC24V100V
- Reactiespanning: Maximaal 200 kHz
- Fasestroom: 8A/per fase
- Puls methode: Enkele puls (standaard)
- Subdivisie: 2256 (Maximaal 51200 stappen/omwentelingen)
- Koelingsmethode: Koelventilator
- Processor: 32DSP
- Voedingsspanning: 2470V DC
- Logische ingangsstroom: 710 mA
- Puls frequentie: 200 kHz
- Isolatieweerstand: 500 MOhm
- Interface bord: 4as USBpoort Mach3 Breakout Board
- Encoder kabel: 3 meter/ 5 meter/ 8 meter verlengkabel voor encoder.
Verzendinformatie
Wij leveren naar alle EU-landen gratis.
Verzendopties
1. Standaard Verzending
- Kosten: Gratis
- Levertijd: 1 werkdag.
- Verwerkingstijd: 1 werkdag.
2. Verzekerde Verzending
- Kosten: Extra kosten van toepassing.
- Levertijd: 1 werkdag.
- Verwerkingstijd: 1 werkdag.
- Voordelen: Dekt de kosten voor vervanging als het pakket verloren gaat of beschadigd raakt.
Bezorgdetails
- Volgen: Alle pakketten bevatten een geldige track & trace code.
- Vervoerders: Leveringen worden doorgaans verzorgd door DHL, GLS of DPD.
Neem Contact Met Ons Op
Voor vragen of hulp, bezoek ons hulpcentrum.
Retouren
90 dagen gratis retour voor defecte of onjuiste items
Als je item defect of onjuist is, retourneer het dan gratis binnen 90 dagen. Wij dekken de verzendkosten.
Hoe te retourneren
Ga naar ons retourformulier hier, vul je bestelgegevens in en binnen 24 uur ontvang je een reactie!
Terugbetalingen verwerken
Terugbetalingen worden verwerkt binnen 7-10 werkdagen na ontvangst van het geretourneerde item.
Jouw tevredenheid is onze prioriteit!